Processor Modules
 |
| The CP-30 features 32MB of memory and embedded support for ISaGRAF IEC-61131 programming. |
Processor modules (CP-11, CP-21, CP-30, PC-1) provide all processing, I/O scanning, logic, control and communications functions required in any of the RTU configurations that may be applied. The I/O controller / processor module has up to three independent communications ports. Ports 2 and 3 can use plug-in option boards while port 1 is fixed as RS232C. CP-30 port 1 is 10/100 Ethernet port.
RTUs may have up to 2 CP-11 modules that can serve up to four backplanes in a hot standby configuration (note: one processor should be in an odd numbered backplane slot and the other in an even numbered backplane slot). One processor controls I/O module scanning and communications while the other redundant processor listens. The redundant processor module will take control under the following conditions:
- Failure of I/O module scan
- Failure of Communications on selected ports
- Toolbox command
- Ladder command
The CP-10/11 has 1MB of flash memory for the storage of all operating code and selected system parameters, and 1MB of battery-backed static RAM for all configuration and event storage data.
The CP-21 has 1MB of flash memory for the storage of all operating code and selected system parameters, and 2MB of battery-backed static RAM for all configuration and event storage data. The CP-21 is also loaded with an ethernet driver chip that allows use of an ‘E’ ethernet option board on port 2 only.
The CP-30 is our latest processor in the line featuring 32MB of memory, support for ISaGRAF IEC-61131-3 five-language programming and IEC61499 distributed processing, and is configured using our powerful Toolbox Plus+ programming environment.
Products
There are 4 products in this category.
Features: CP-xx (CP-10, CP-11, CP-21) processor modules
provide all processing, I/O scanning, logic, control
and communications functions required in any of the
RTU configurations that may be adopted.
Print Datasheet
Features The Kingfisher CP-30 is a powerful
processor module designed for the most challenging RTU
applications.
Print Datasheet
Features: The multi communications module for the
Series II Remote Terminal Unit provides additional ports
in any RTU configuration. This module has up to three
independent communications ports.
Print Datasheet
Features: The PC-1 combines the functions of a power
supply and a processor module.
Print Datasheet
Home
