Option J – Image Capture
 |
Capture and send images over an existing Kingfisher RTU/SCADA communications network. |
Features:
The Kingfisher Image Capture device is used to capture and send images over an existing Kingfisher RTU/SCADA communications network.
Image capture can be initiated via an RTU ladder logic command or via the Image Manager application software. A number of images may be stored within the RTU memory in JPEG format. These can be downloaded to a PC using the Image Manager application software where they can be viewed.
Images captured can be sent via your existing Kingfisher RTU/SCADA network using serial, radio, GSM, PSTN, etc.
NOTE: Camera not included (camera requires PAL/NTSC 75 ohm composite analog output).
Overview
- Image capture option board
- Capture images from up to 2 cameras
- Fits CP-10, CP-11, MC-10, MC-11
Order Information
- COMMS-OPTION-J (Image Capture - for CP-11/CP-21/MC-11, option port 2/3)
Datasheets
Product specifications:
|
General |
| |
|
| Configuration Software |
Kingfisher Toolbox or Image Manager Software |
| Camera Trigger |
RTU Ladder Logic or Image Manager Software |
| Picture Uploading/Viewing |
Image Manager Software |
| Maximum Resolution |
PAL 352 x 288 pixels (100K pixels) |
| Colour Coding |
16 bits/pixel - luminance and chrominance |
| Number of Camera inputs |
2 |
| Camera Input Socket Type |
SMB Male (on option board) |
| Camera Input 1 or 2 |
75-Ohm composite camera (analog)*
PAL or NTSC |
| Signal Input Levels |
0.5Vpp to 1.9Vpp (peak to peak)
1Vpp recommended |
| Camera Cable Recommendations |
(2.5m RG179 camera cable is included in kit, female BNC at Camera end. Camera requires Male BNC to connect.)
Up to 100m: RG-59
Up to 250m: RG-6
Up to 400m: RG-11 |
| Form Factor |
Standard Series II daughter board |
| |
|
Electrical |
| Camera Input Impedence |
75-Ohm nominal |
| Camera Input Bandwidth |
7Mhz nominal |
| Normal Camera Input |
0.5V Minimum, 1.0V nominal, 1.9V Peak |
| Absolute Camera Input |
-0.7V minimum, 6.0V Peak |
| Supply Current (Internal 5V) |
500mA nominal |
| |
|
Environmental Parameters |
| |
| Operating Temperature |
0°C to 70°C / 32°F to 158°F |
| Storage Temperature |
-40°C to 125°C / -40°F to 257°F |
| Relative Humidity |
5 to 95% non-condensing |
| |
|
Image Size |
| |
|
| Large |
PAL 352 x 288 / NTSC 320 x 240 pixels |
| Small |
PAL 176 x 144 / NTSC 160 x 120 pixels |
Home
